Industrial Evaporators

We are the manufacturer of forced circulation evaporator.

We are the manufacturer of kettle evaporator. In Kettle evaporators the liquid product usually enters the evaporator at the head of the evaporator. The product is evenly distributed into the heating tubes. A thin film enters the heating tube and it flows downwards at boiling temperature and is partially evaporated. In most cases steam is used for heating the evaporator. The product and the vapor both flow downwards in a parallel flow. This gravity-induced downward movement is increasingly augmented by the co-current vapor flow. The separation of the concentrated product from its vapor is undergoing in the lower part of the heat exchanger and the separator

We are the manufacturer of thermic fluid evaporator.

Our exclusive assortment of mechanical evaporator efficiently evaporates the liquid phase of heavy concentrate solute to vapor phase by using thermal power. The process of converting liquid phase to vapor phase is known as evaporation and the mechanical devices are evaporators. The assortment is manufactured by our professionals as per the specifications and requirements of our esteemed clients. It is available in various ranges to treat the heavy concentrate solute.
 

We are the manufacturers of steam evaporator.

In general Falling Film Evaporators are build vertically.  Typically, liquor is fed to the tops of tubes arranged as a bundle and flows down the walls as a film under gravity.
The liquid to be vaporized flows in the majority of designs inside the tube. To balance the in general high heat transfer of the evaporating film, condensing steam is often used as heating medium. In the majority of designs the vapour generated is flowing concurrent with the liquid film. The pressure and the vapour flow direction is dictated by the location and the temperature level of the applied condenser. In general the liquid and vapour is separated at the bottom of the unit.