Air Pollution Control Systems

We manufacture and export high performance air pollution control system (APC) to purify air of surrounding. Emission of various harmful gases and solutes dissolved in air has resulted into air pollution which in turn causes undesirable changes in the atmosphere.There are two types of matter such as particulars matter, gaseous matter to affect the atmosphere.Our range of APC system effectively clean air and assists in developing pollution free surrounding.The system operates under scrubbing system.

Air scrubbers are commonly used in process-air applications to eliminate potentially harmful dust and pollutants. A liquid, in general water added with active chemicals adapted to the process, is sprayed in to the air flow. Aerosol and gaseous pollutants in the air stream are removed by either absorption or chemical reactions with the water solution.

A wet scrubber is an air pollution control device that removes Particulate matter and acid gases from waste gas streams of stationary point sources. The pollutants are removed primarily through the impaction, diffusion, interception and/or absorption of the pollutant onto droplets of liquid. The liquid containing the pollutant is then collected for disposal. There are numerous types of wet scrubbers which remove both acid gas and Particulate matter.

We are also involved in manufacturer dust collectors.

The Vertical Packed Bed Scrubber is custom designed for each application to provide high efficiency, low cost gas cleaning. The packing media is uniquely shaped to provide abundant surface area to provide intimate contact between the gas and scrubbing liquid.

The resultant effect is high scrubbing efficiency, allowing optimum packing section length with a compact design and low pressure drop. Several configurations and options are offered for the Vertical Packed Bed Air/Gas Scrubber.

•     Multiple units
•     Vertical
•     Horizontal Models
•     Special Materials
•     Integration into complete environmental control systems are all available.

Ideally suited for:

•     Acid fumes
•     Chemical fumes
•     Chemical odors
•     Food processing odors
•     Metal finishing fumes
•     Steel processing fumes
•     Sulphur based fumes

The design of the Venturi Scrubber consists of a “wet approach” venturi followed by a liquid entrainment separator. Dust laden gases enter the venturi and instantly make contact with the tangentially introduced scrubbing liquid swirling down the venturi’s converging walls.

At the venturi throat, the gas and liquid streams collide and the liquid breaks down into droplets which trap dust particles.

•     This gas/liquid mixture passes through a flooded elbow, and then enters the entrainment separator through a tangential inlet.
•     Centrifugal action removes the heavy wetted particles from the gas stream.
•     As an alternate, when very large diameter separators are required, the liquid is separated by passing the stream through a chevron-type mist eliminator baffle.
•     The dust/liquid mixture is discharged from the separator bottom drain and the cleaned gas leaves through the top of the separator.